Odroid C2

P
Petr Jedlicka posted Sep 14 '16, 12:48:

Hello,

I will use the Samplerbox as organ sampler.
I do not know whether performance of RB PI 3 is adequate.
The church organ need more polyphony.

Odroid C2 and raspberry PI 3 have the same CPU. Odroid has more RAM (2GB). This is good for organ samples.

Can I install the samplerbox to Odroid C2?

Specifications
Amlogic S905 (ARM® Cortex®-A53(ARMv8) 2Ghz quad core CPU)
2Gbyte DDR3 SDRAM
ARM Mali™-450 MP3 GPU (OpenGL ES 2.0/1.1 for Linux and Android)
HDMI 2.0 4K/60Hz display
H.265 4K/60FPS and H.264 4K/30FPS capable VPU
Gigabit Ethernet
40+7pin GPIO port
eMMC5.0 HS400 Flash Storage slot / UHS-1 SDR50 MicroSD slot
USB 2.0 Host x 4, USB 2.0 OTG x 1 (power + data capable)
Infrared(IR) Receiver
Ubuntu 16.04 and Android 5.1 Lollipop based on Kernel 3.14 LTS
Board dimensions is identical to the ODROID-C1+

Thank you for info.
Petr

C
Caesar posted Jan 19 '17, 18:40:

Up! (I am in the same situation)

A
Alpytron posted Dec 25 '19, 17:39:

Same here. Any update?

E
Erich posted Dec 25 '19, 18:05:

I am playing around with Samplerbox since monday again and the time to switch from one sample to another is still in longer milliseconds.
As for a Pipe-Organ, You probable want to change the registers.
There are only a few options to do this:

  1. Switch Program
  2. Use only very short or a low amount of samples to speed up the time for changing the programs
  3. Switch Octaves .. 4 lower octaves with one register and 4 upper octaves with other registers
  4. Multiple Rapis with Samplerbox, one per Register

.. sound all not very good right.

...

  (not published)
  I want to post as guest
 

Post